High Security Hologram Labels (FIPS)

1. UltraGuard™ labels are recommended for conventional surfaces and for difficult surfaces such as low energy plastics, textured surfaces, CARC paint, powder-coated paint, etc. This is the best performing tamper evident label we produce.
2. We offer free samples for testing. We recommend testing prior to placing an order.
3. Our FIPS security labels are suitable for indoor applications for at least 5 years and outdoor applications for up to 2 years.
4. The silver metallic holograms may not be suitable for use on printed circuit boards (or other electrical applications). The silver metallic layer is conductive and may cause issues if in direct contact with the circuitry. For these applications, consider a transparent hologram.

Choosing Label Size and Shape

1. If affixing the label onto a flat surface (no changes in direction as shown in "A"), any label model or any size or shape label is acceptable.
2. If wrapping the label over an edge (90 degree change in direction as shown in "B") or ledge (180 degree change in direction as shown in "C"), select a long and narrow rectangle shape. It is important to note that when wrapping over an edge you should maximize the amount of label material on both surfaces opposite the 90 degrees for optimal adhesion. A small label area (as shown in “D”) is not recommended.
3. It is not recommended to apply a long narrow label parallel to an edge (as shown in “E”).

Our high performance holograms include:

• A stock hologram image to combat counterfeiting.
• A high strength adhesive, which bonds to most surfaces and resists attack from chemicals or extreme temperatures.
• A robust tamper evident security feature.
• The unique serial number (and optional custom imprint) is protected with a clear top lamination for added durability and security.

Cleaning the surface for optimum adhesion is an important aspect of FIPS applications. This applies to passing the initial test and for application of the labels in production.

For optimum adhesion, surfaces must be cleaned with alcohol to remove surface contaminants before affixing the label:

• Use 90% or higher Isopropyl Alcohol
• Apply alcohol to a clean paper towel and wipe the intended surface to remove contaminants
• Dry the surface with another clean paper towel (some contaminants will remain on the surface if the alcohol is allowed to air dry)
• Apply the label to the clean surface

Your FIPS application must be tested by your independent testing lab. We offer free sample labels for testing prior to ordering.

More information about accredited testing companies and standards can be found on the website for National Institute for Science and Technology, Computer Security Resource Center (www.csrc.nist.gov)

Although our FIPS labels have been tested and approved in many applications, please contact us if you have any problems achieving acceptable results with our FIPS labels to pass the independent testing.

If you need contact information for independent testing labs who specialize in FIPS certification, please contact us. We will provide contact info for at least two companies for you to evaluate.

• Certificate of Compliance (PDF document)
• Typical FIPS 140-2 Application
• Typical Applications
• Registry of Custom Imprints
• Specifications & Intended Use
• General Directions of Use
• Application Tips
• Trouble Shooting Guide
  
• FIPS Fungus Support Document (PDF document)
  
• 5-02 SCH AC Recommended FIPS Label Application (PDF document)
  

1. No changes to the hologram stickers as shown on this page.
2. Payment with a validated credit card.
3. Order quantity is below 10,000 stickers

Our holograms are designed, tested, and intended for anti-counterfeiting, anti-tampering and promotional applications.

Our holographic products do NOT provide any documented health or medical benefits such as improved balance, sleep, pain-relief, weight loss, smoking cessation, etc.

Our holographic products do NOT provide any documented benefits to improve gas mileage, energy efficiency, cell phone reception, etc.

Our holographic products cannot be programmed to resonate at specific frequencies.

In our opinion, claims of medical benefits or improved machine performance are questionable and scientifically unsupported. Consumers should request an independent study (with blind testing) to verify any such claims and benefits.

We are not aware of any independent studies which validate such claims and benefits. Therefore, we will not intentionally produce holograms for these applications.

If NovaVision is requested to produce custom security products or branded packaging, we require proof to substantiate that you are authorized to purchase that product. We independently verify your contact information and legitimacy. If you are not authorized to purchase the product, your contact information may be provided to law enforcement authorities without further notice. NovaVision cooperates with all local, state, federal and international law enforcement agencies to catch and prosecute fraudulent purchases and counterfeiting.

Counterfeiting is illegal and is defined as any attempt to copy an original with the intent to defraud. It is illegal to purchase a fake identification product, an unauthorized custom hologram, an unauthorized duplicate security label, or counterfeit packaging which uses a copyrighted brand name or logo. Further, in the USA, legislation is pending to expand the criminal law so that federal prosecutors will have an easier time prosecuting counterfeiters that manufacture bogus product labels and packaging.