Non-Residue Security Labels

We offer multiple constructions of non-residue labels, which allows you to select the label which best fits your application.

The following table summarizes and compares the relative performance and features of our non-residue label products.

Footnotes:
(1) Using our polyester affixing pad under the label improves the performance of the tamper evident feature to 'GOOD'
(2) Using our polyester affixing pad under the label improves non residue performance to 'GOOD' (3 months)
(3) If the surface structure is weak, the label may tear the surface without revealing the hidden VOID message in the label; test to confirm suitability
(4) If applied to painted or varnished wood, the adhesive may remove some or all of the finish, Test in an inconspicuous area first
(5) To improve the performance for tamper evidence, clean the surface with 90% ISO propyl alcohol before affixing the label
(6) Typical minimum surface temperature to assure label will show tamper evidence after affixing to the surface
(7) Typical temperature range where label will show tamper evidence when removed
(8) Background colors are diffracted from white light (not printed with inks)

Typically for most surfaces, when our SecureGuard™ labels are removed they will not leave adhesive residue for 3 months. However, the actual length of time for non-residue performance varies based on the surface. Please review the list of surfaces in the section “Choosing a Non-Residue Label” before selecting your label. Then request our free samples to test the labels before you order.

After affixing to the surface, the length of time for non-residue performance may be shortened if the label is exposed to temperatures above +120°F or below +30°F

To minimize adhesive residue on the surface, remove the label using a 180 degree peel angle.

If there is adhesive residue, it can be cleaned with a citrus-based household cleaner (Goo-gone, Orange Sol, etc) or isopropyl alcohol.

Our optional affixing pads may solve some issues for difficult surfaces:

1. For low energy surfaces (smooth plastic, textured plastics, powder coated paint, etc) apply an affixing pad which will increase the tamper evident feature.
2. For high energy surfaces (bare stainless steel, PVC plastic, etc.) apply an affixing pad which will extend the time duration for non residue performance.

For the customized imprint, our standard process is to print custom text, logos and serial numbers on the surface of the label using thermal transfer resin ribbons. The thermal inks are durable to mechanical abrasion, scratching and most liquids and are suitable for most applications. However, thermal printed inks can be removed with certain solvents such as gasoline, alcohol, or lotions containing alcohol. As an added option, we also offer UV-cured ink jet (black ink only) imprints which are more durable.

If the non-residue security label is not working to your satisfaction, please review the Security Label Trouble Shooting Guide for suggestions. Or give us a call.

If NovaVision is requested to produce custom security products or branded packaging, we require proof to substantiate that you are authorized to purchase that product. We independently verify your contact information and legitimacy. If you are not authorized to purchase the product, your contact information may be provided to law enforcement authorities without further notice. NovaVision cooperates with all local, state, federal and international law enforcement agencies to catch and prosecute fraudulent purchases and counterfeiting.

Counterfeiting is illegal and is defined as any attempt to copy an original with the intent to defraud. It is illegal to purchase a fake identification product, an unauthorized custom hologram, an unauthorized duplicate security label, or counterfeit packaging which uses a copyrighted brand name or logo. Further, in the USA, legislation is pending to expand the criminal law so that federal prosecutors will have an easier time prosecuting counterfeiters that manufacture bogus product labels and packaging.