General Specifications
| Test for Compatibility: | For finished furniture, cabinets, doors, etc, painted and varnished surfaces are also acceptable. However if the varnish/painted surface is not fully bonded, the finish may be removed when the label is removed. Test in an inconspicuous area |
| Label Material: | Polyester film, 0.002 inch thick |
| Adhesive Material: | Permanent acrylic, typically 0.001 inch thick |
| Ready To Use: | Labels are die cut to size for easy removal, and provided on rolls with 'peel and stick' adhesive backing. |
| Recommended Surfaces: | Textured surfaces, porous surfaces (corrugated cardboard, paperboard, paper), most plastics and other low energy surfaces. |
| Tamper Evident Feature: | Tamper evident polyester labels have a hidden security pattern under the exterior film. The hidden pattern is typically showing the words "VOID OPENED". When removed, the hidden pattern will be revealed showing "VOID OPENED" in the film. |
| Non Residue Feature: | When removed, the film will show the "VOID OPENED" pattern, but no (or little) adhesive will transfer to the surface. This feature is most effective for all surfaces except PVC (it may leave a residue on PVC). Also, at service temperatures below 0F or above 120F, the non residue feature may be disrupted; the film will still show tamper evidence when removed, but it may leave an adhesive residue on the surface. |
| Sunfast Inks: | Background colors and imprint inks are colorfast for exposure to sunlight for at least one year. |
| Imprint Resolution: | 200 dpi minimum. |
| Optional Lamination: | If the custom imprint will be exposed to harsh chemicals or excessive abrasion, an optional clear lamination over the custom imprint may be required for maximum durability of the imprint. |
| Manual Application: | Stock labels are designed for manual application. If auto-affixing, special order a trial roll for testing; request labels in a single lane. |
| Packaging: | Each roll of labels is on a 3 inch ID core and is provided with a
dispenser carton. |
| Storage & Shelf Life: | Recommended Storage Temperature: 100°F or less |
| Minimum Application Temperature: | +10°F |
| Service Temperature: | After application, the service temperature range is -40°F to +200°F. However, at service temperatures below 0°F or above 120°F, the non residue feature may be disrupted; the film will still show tamper evidence when removed, but it may leave an adhesive residue on the surface. |
| Outdoor Service: | Polyester labels are suitable for indoor and outdoor applications; the expected life for outdoor applications is 1 year minimum. |
| Food Labeling: | Non-residue labels are NOT FDA-rated for DIRECT or INDIRECT contact with food. |
Intended Use
A security label that leaves no adhesive residue when removed; this feature eliminates the time and material to clean up the sticky adhesive residue typical of other security labels.
